2. Press the ▲▼◀▶ button.
The area of the magnified image will be moved.
3. Press the D-ZOOM (−) button.
Each time the D-ZOOM (−) button is pressed, the image is reduced.
NOTE:
• The image will be magnified or demagnified at the center of the screen.
• Displaying the menu will cancel the current magnification.
❹ Changing Eco Mode/Checking Energy-Saving Effect
Using Eco Mode [ECO MODE]
The ECO MODE (NORMAL and ECO) increases lamp life, while lowering power consumption and cutting down on
CO
emissions.
2
Four brightness modes of the lamp can be selected: [OFF], [AUTO ECO], [NORMAL] and [ECO] modes.
[ECO MODE]
[OFF]
[AUTO ECO]
[NORMAL]
[ECO]
To turn on the [ECO MODE], do the following:
1. Press the ECO Button on the remote control to display [ECO MODE] screen.
2. Press the ECO button again to select a mode you wish.
• Each time the ECO button is pressed, the choices will be changed:
OFF → AUTO ECO → NORMAL → ECO → OFF
TIP:
• The leaf symbol at the bottom of the menu shows the current selection of ECO mode.
Description
The lamp brightness is 100%.
Lamp power consumption will be changed between
[OFF] and [NORMAL] automatically according to
picture level
NOTE: A bright gradation may be less visible depending on
the image.
Lamp power consumption: (approx. 80%
bright-ness on 6655WU/6655W and approx. 86%
on 6647WU/6647W) The lamp life will extend by
lowering the lamp power.
Lamp power consumption: (approx. 60%
brightness on 6655WU/6655W and approx. 65%
on 6647WU/6647W). The lamp life will extend
longer than the one on NORMAL mode by
controlling power appropriate for the lamp. The
maximum power be-comes equivalent to the
power in NORMAL.
26
3. Convenient Features
Status of LAMP indicator
Steady Green
light
Blinking Green
light