Table of Contents
Advertisement
PC/AV Mode
Set
PC/AV Mode
to AV. The picture size will be enlarged.
This option is useful when you view a movie.
•
Set to
PC
when connected to a PC.
•
Set to
AV
when connected to an AV device.
― Products with a display area of 16:9 or 16:10 are only supported.
― If the product is in HDMI,
DisplayPort
mode and the screen says
settings of the source device.
press the JOG button to display the function-button screen and then select
→
System
→
PC/AV Mode
→ HDMI,
DisplayPort
Source Detection
Select either
Auto
or
Manual
as the method to recognize input source.
― Not available when
PIP/PBP Mode
is set to On.
Check the cable connection and the
→
PC
or AV.
Key Repeat Time
Control the response rate of a button when the button is pressed.
Acceleration,
1
sec, or
2 sec
can be selected. If
when a button is pressed.
Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
•
Working: The power LED is on when the product is turned on.
•
Stand-by: The power LED is on when the product is turned off.
Reset All
Return all the settings for the product to the default factory settings.
No Repeat
is selected, a command responds only once
39
Advertisement
Table of Contents
