Toshiba Satellite Pro R50-E Series User Manual page 91

The Port Replicator connects directly to the docking interface on the
underside of the computer. The AC adaptor connects the Port Replicator to
a power source.
To dock your computer in the Port Replicator, do the following:
1.
2.
1. Docking port (computer)
Product appearance depends on the model you purchased.
User's Manual
You must connect the AC adaptor before you connect to a Port
Replicator.
The ports on the Port Replicator might have higher priority than the
ports on the docked computer.
When you use external display ports on the Port Replicator or on your
computer, some software might show different type of ports which you
connected.
When connecting an AC Adaptor to the Port Replicator, use only the
AC Adaptor included with Port Replicator. Do not use the computer's
AC Adaptor.
Refer to the Port Replicator's User's Manual for more details.
Align the top left and top right corner of your computer to the C' mark
on the Port Replicator.
Press down on the back of the computer until it clicks into place. The
computer connector on the port replicator engages the computer's
docking port.
When the computer is connected, the Docked light on the Port
Replicator glows green while the computer is powered on.
Figure 4-19 Aligning your computer with the Port Replicator
1
4-38