Auxiliary Entries; Percent Calculations (Premium Or Discount) - Sharp ER-A180 Instruction Manual

Hide thumbs Also See for ER-A180:
Table of Contents

Advertisement

Manual VAT 1-3 system
Ñ
This system provides the VAT calculation for taxable 1 through 3 subtotals. This calculation is performed using
the corresponding programmed rate when the
Manual VAT 1 system
To use a programmed rate
Ñ
This system enables the VAT calculation for the then subtotal. This calculation is performed using the VAT 1
preset rate when the
99.9999) can be used.
Manual tax 1-3 system
Ñ
This system provides the tax calculation for taxable 1 through 3 subtotals. This calculation is performed using
the corresponding programmed rate when the
you must finalize the transaction.
Automatic tax 1-2 and automatic VAT 3 system
This system enables the calculation in the combination with automatic tax 1 and 2 and automatic VAT 3. The
combination can be VAT3 corresponding to taxable 3 and any of tax 1 and 2 corresponding to taxable 1 and
taxable 2 for each item. The tax amount is calculated automatically with the corresponding programmed rates.
• Tax statuses of PLU is depending on that of the department which the PLU belongs to.
• VAT/tax assignment symbol can be printed at the fixed right position near the amount on the
receipt as follows:
When the multiple VAT/tax is assigned to a department or a PLU, a symbol of the lowest number
assigned to VAT/tax rate will be printed. For details, contact your authorized SHARP dealer.
Key operation example
550
(When the manual VAT
1-3 system is selected)

Auxiliary entries

5

Percent calculations (premium or discount)

• Your register provides the percent calculation for subtotal and/or each item entry depending on programming.
• Percentage: 0.01 to 100.00% (Depending on programming) (Application of preset rate (if programmed) and
manual rate entry are available.)
VAT rate
key is pressed just after the
VAT1
VT1
VAT2
VT2
VAT3
VT
ù
Ñ
É
key is pressed just after the
Ñ
key. For this system, the keyed-in VAT rate(0.0001 to
key is pressed just after the
Tax1
Tax2
Tax3
Print
Ñ
key.
Ñ
key. After this calculation,
TX1
TX2
TX
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Er-a160

Table of Contents