[Eye-Fi settings] does not appear.
[Eye-Fi settings] will appear only when an Eye-Fi card is inserted in
the camera. If the Eye-Fi card has a write-protect switch set to the
LOCK position, you will not be able to check the card's connection
status or disable Eye-Fi transmission (p.352).
Playback Problems
Part of the image blinks in black.
It is the highlight alert (p.310). Overexposed areas with clipped
highlight will blink.
The image cannot be erased.
If the image is protected, it cannot be erased (p.302).
The movie cannot be played back.
Movies edited with a computer cannot be played back with the camera.
Camera operation noise can be heard when the movie is
played back.
If you operate the camera's dials or lens during movie shooting, the
operation noise will also be recorded. Using the Directional Stereo
Microphone DM-E1 (sold separately) is recommended (p.251).
The movie has still moments.
During autoexposure movie shooting, if there is a drastic change in the
exposure level, the recording will stop momentarily until the brightness
stabilizes. In such cases, shoot in <a> mode (p.225).
Troubleshooting Guide
379