a. To install a new 2.5-inch storage drive into the bracket, flex the bracket and align pin
4
and pin
on the bracket with the corresponding holes in the storage drive. Do not touch the circuit
board
5
on the storage drive.
Figure 109. Installing the 2.5-inch storage drive into the bracket
b. Slide the new storage drive into the type-2 storage-drive cage until it snaps into position.
Figure 110. Installing the 2.5-inch storage drive into the type-2 storage-drive cage
.
Chapter 7
Hardware removal and installation
1
, pin
2
, pin
3
,
105