Table of Contents
Advertisement
User's Guide
Paper Source Settings:
Paper Setting:
Select the paper size and paper type you loaded in the paper sources.
Rear Paper Feed Priority:
Select On to give printing priority to paper loaded in the rear paper feed.
A4/Letter Auto Switching:
Select On to feed paper from the paper source set as A4 size when there is no paper source set
as Letter, or feed from the paper source set as Letter size when there is no paper source set as
A4.
Auto Select Settings:
Select On for settings to automatically print on paper from any sources containing paper that
matches your paper settings.
Error Notice:
Select On to display an error message when the selected paper size or type does not match the
loaded paper.
Paper Setup Auto Display:
Select On to display the Paper Setting screen when loading paper in the paper source. If you
disable this feature, you cannot print from an iPhone or iPad using AirPrint.
Printing Language:
Select the printing language for the USB interface or the network interface.
Universal Print Settings:
These print settings are applied when you print by an external device without using the printer driver.
Top Offset:
Adjust the top margin of the paper.
Left Offset:
Adjust the left margin of the paper.
Top Offset in Back:
Adjust the top margin for the back of the page when performing 2-sided printing.
Left Offset in Back:
Adjust the left margin for the back of the page when performing 2-sided printing.
Check Paper Width:
Select On to check the paper width before printing. This prevents printing beyond the edges of
the paper when the paper size setting is incorrect, but this may lower the print speed.
Skip Blank Page:
Skips blank pages in the print data automatically.
Preparing the Printer
33
Advertisement
Table of Contents
