Table of Contents
Advertisement
•
Install legs by engaging leg tabs over bottom edge of the
4
appliance body.
•
Once the leg is in place, attach two #10-24x1" screws
through the leg and into the appliance body.
•
Repeat for the remaining legs.
•
When all four legs are securely installed, carefully turn the
unit upright.
•
Slide the grease tray into the rear of the unit.
#10-24x1"
Screw
5
• Attach the side handle assemblies to the unit using two #10-24x1/2" screw per
handle.
• Install the control knobs on to the valve stem and the ignitor stem.
Grease tray
Leg Tabs shown
in proper
position.
Control
#10-24x1/2"
Screw
rails
Knob
Qty: 8
#10-24x1" Screw
Grease Tray
Qty: 4
#10-24x1/2" Screw
Ignitor
Knob
Page 15
Hide quick links:
Advertisement
Table of Contents
