Table of Contents
Advertisement
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE
PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED
FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT
THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have suffi cient magnitude to cause
electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit
has been included. Therefore, it should be read carefully in order to avoid any problems.
CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not supplied with
this equipment, please contact your supplier. For all other cases, please use a power cord that matches the AC voltage of the power
outlet and has been approved by and complies with the safety standard of your particular country.
Plug Type
North America
Plug Shape
Country
U.S.A./Canada
Voltage
120*
* When operating the monitor with its AC 125-240V power supply, use a power supply cord that matches the power supply voltage of the
AC power outlet being used.
NOTE:
This product can only be serviced in the country where it was purchased.
Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation.
ErgoDesign is a registered trademark of NEC Display Solutions, Ltd. in Austria, Benelux, Denmark, France, Germany, Italy, Norway,
Spain, Sweden, U.K.
E
S
is a U.S. registered trademark.
NERGY
TAR
All other brands and product names are trademarks or registered trademarks of their respective owners.
As an E
S
®
Partner, NEC Display Solutions of America, Inc. has determined that this product meets the
NERGY
TAR
E
S
guidelines for energy effi ciency. The E
NERGY
TAR
product or service.
DisplayPort and DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards
Association in the United States and other countries.
HDCP (High-bandwidth Digital Content Protection): HDCP is a system for preventing illegal copying of video data
sent over a digital signal. If you are unable to view material via the digital signal input, this does not necessarily
mean the display is not functioning properly. With the implementation of HDCP, there may be cases in which certain
content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP community (Digital Content
Protection, LLC).
The terms HDMI and HDMI High-Defi nition Multimedia Interface and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
MHL and the MHL logo are a trademark, registered trademark or service mark of MHL,
LLC in the United States and/or other countries.
•
The intended primary use of this product is as an Information Technical Equipment in an offi ce or domestic environment.
•
The product is intended to be connected to a computer and is not intended for the display of television broadcast signals.
WARNING
CAUTION
European Continental
EU (except U.K.)
230
S
emblem does not represent EPA endorsement of any
NERGY
TAR
English-1
U.K.
Chinese
U.K.
China
230
220
Japanese
Japan
100
Advertisement
Table of Contents
