Related Manuals for Samsung HG40ED790
Summary of Contents for Samsung HG40ED790
- Page 1 LED TV Installation manual Thank you for purchasing Samsung product. To receive more service, please register your product at www.samsung.com/register Model Serial No.
- Page 2 SBB/STB. If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts according to interface protocol. Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operation.
-
Page 3: Table Of Contents
Contents y Accessories ............................. 4 y Installing the LED TV Stand ........................5 y Viewing the Connection Panel ........................8 y TV Controller ............................11 y Viewing the Remote Control ........................12 y Connecting the TV with SBB ........................14 y Connecting the Bathroom Speakers ...................... -
Page 4: Accessories
Accessories ✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎ The items’ colour and shapes may vary depending on the model. • Remote Control & Batteries (AAA x 2) • Holder-Wire Stand • Power Cord • CI Card Adapter... -
Page 5: Installing The Led Tv Stand
When installing the stand, use the provided components and parts. 1 EA 1 EA x8 (M4 X L12) Stand Guide Stand Screws HG40ED790 x4 (M4 X L12) Top View Front Guide Stand assembly direction ATTENTION DO NOT USE DO NOT USE... - Page 6 x4 (M4 X L12) ✎ NOTE • Make sure to distinguish between the front and back of each component when assembling them. • Make sure that at least two persons lift and move the TV. English...
- Page 7 Hotel Mount Kit ¦ Bolt + Nut Short Bolt (2EA) Long Bolt (2EA) Nut (2EA) Washer (2EA) Affix the stand to a flat surface such as a dresser top, desk top, or entertainment centre as Bottom shown. WARNING: To prevent injury, you must attach this TV securely to the floor, a table, a dresser top, etc. with the Hotel Mount Kit as described in these instructions.
-
Page 8: Viewing The Connection Panel
Viewing the Connection Panel HG40ED790 ✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off. ✎ When connecting an external device, match the colour of the connection terminal to the cable. - Page 9 This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional modules to improve device use and convenience. VARIABLE AUDIO OUT Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the Variable port (RCA). VOL-CTRL Used to control the volume of the Bathroom speaker.
- Page 10 Display Modes You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the resolution you choose. After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is 1920 x 1080 @ 60 Hz.
-
Page 11: Tv Controller
TV Controller TV Controller is a multi directional button that helps navigate without using the remote control. ✎ Some functions which require a PIN code may not be available. ✎ The product colour and shape may vary, depending on the model. ✎... -
Page 12: Viewing The Remote Control
Viewing the Remote Control ✎ This remote control has Braille points on the Power , Channel , and Volume buttons and can be used by visually impaired persons. SOURCE Display and select available video Turns the TV on and off. sources. - Page 13 Installing batteries (Battery size: AAA) ✎ NOTE • Use the remote control within 7m of the TV. • Bright light may affect the performance of the remote control. Avoid using nearby special fluorescent light or neon signs. • The colour and shape may vary depending on the model. • Remote control button 'HOME' &...
-
Page 14: Connecting The Tv With Sbb
Connecting the TV with SBB TV Rear Panel ETH MODEM Data Cable 1. Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable. ✎ Use data communication. List of Vendors and Compatible Data Cables Supplied with the TV ¦... -
Page 15: Connecting The Bathroom Speakers
Connecting the Bathroom Speakers You can connect the Bathroom Speakers using the following method. Audio Loop In ¦ An additional Headphone Box can be installed on a bed or business desk for added convenience. The installation procedures are given below. • Detailed Drawing of the Headphone Box. -
Page 16: Connecting The Mediahub Hd
Connecting the MediaHub HD Output to any external source connected to MediaHub HD on the hotel desk. MediaHub HD Rear TV Rear Panel HDMI RS/232 1 RS-232 Data Cable 2 HDMI cable 1. Connect the port of the TV and the RS/232 port of the MediaHub HD. 2. -
Page 17: Connecting The Rjp (Remote Jack Pack)
3. Connect the port of the TV and the RS/232 port of the RJP. ✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660 (HD Plus). • RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. - Page 18 • The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10 seconds. All LEDs blink 5 times to acknowledge that this has been finished. • The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart.
-
Page 19: Connecting To A Common Interface Slot (Your Tv Viewing Card Slot)
Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot) ✎ Scenario 1: When no inputs are connected. Attaching the CI Card Adapter Attach the adapter as shown side. ✎ To install the CI CARD Adapter, please remove the sticker attached to the TV. -
Page 20: Setting The Hotel Option Data
• Standalone mode : TV works alone, without an SI STB or SBB. • Interactive mode : Samsung / 2M / Locatel / VDA / VDA-S / Acentic / Sustinere / Quadriga / ETV / Ibahn / Magilink / Otrum / Siemens / Amino / MDC / Innvne... - Page 21 Hotel TV Function Description Category Item Initial value When there is a mismatch between the data in the channel map and the transmitted data, the TV autotunes the channels to restore the data/parameters in the channel map. Channel Rescan • ON: When Channel Rescan Message is ON, The OSD showing that the channels are Message being rescanned will be displayed to Hotel Guests.
- Page 22 Hospitality Logo DL • BMP or AVI files only. • Max file size : BMP - 960 X 540. AVI - 30MB. • The file can only be named samsung.bmp or samsung.avi. Logo Display Time Set the logo display time (3/5/7 Seconds). Clone TV to USB Clone the current TV option values to a USB memory device.
- Page 23 Sound Bar Out You must connect the Sound Bar to hear the sound. OFF: Sound will come out through TV speakers normally. Display the web site of related Samsung service center, software version, and Mac Contact Samsung address information. When the TV is in standby mode, you can configure the settings of external LED.
- Page 24 Welcome Message ¦ The welcome message is used to display custom messages on the TV every time TV is turned on by a Guest in Hotel room. – Welcome message settings are found in the Hotel Option Menu. – Welcome message should be ON in order to display the message on power-on. Hospitality Mode Standalone Network...
- Page 25 Logo File Format – The TV supports only BMP and AVI format. – The file name must be samsung.bmp or samsung.avi. – The maximum resolution of the BMP format is 960 x 540. – The maximum file size for AVI format is 30MB.
- Page 26 USB Cloning ¦ USB Cloning is used to download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload them to other TV sets. All the user-defined settings from the TV (Master Set) can be copied to the USB device. • Cloning from TV to USB: This copies stored data from the TV set to the USB device.
- Page 27 MPEG Noise Filter General HDMI Black Level Game Mode Film Mode Sound Feedback LED Clear Motion Boot Logo Picture Off Samsung Instant On Reset Picture Anynet+(HDMI-CEC) Sound Mode DivX® Video On Demand Sound Effect DTS TruSurround HD DTS TruDialog Equaliser...
- Page 28 Plug & Play ¦ Hotel Plug & Play automatically performs Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup. – Hotel Plug & Play is available only one time when power is first turned ON. – This is available after first setting up the TV and transferring Clone TV data to a USB drive. –...
- Page 29 – When Standalone Plug & Play is selected from “Easy Set Up” OSD, “Select Menu Language” OSD is displayed. – Initial Highlight : English – Display time: OSD timeout and operation are the same as Samsung's consumer TV models. – If the ENTER button is pressed, “Select Area”...
- Page 30 Multi Code Remocon ¦ Multi Code Remocon is a special transmitter which is designed to control each TV with one remote. This is useful where there is more than one TV in a location, such as in a hospital the set ID number is displayed in the source osd.
- Page 31 CH Bank Editor (Smoovie TV Only) ¦ Channel Bank Editor edits channels, with 3 different Bank Options. Depending on the Bank card, there are specific channels Hotel customers can enjoy. Setting the CH Bank Editor under Stand-alone Mode 1. Enter the Hotel Standalone menu by “MUTE + ENTER”...
- Page 32 5. Edit the channel bank like below example. a. BANK1 (Free channel): Select the channel that will be used when remote doesn’t have any card. b. BANK2 (Family Card - Green): Select the channel that will be used when remote has a GREEN CARD. c.
- Page 33 Channel Editor ¦ Channel Editor edits channel number a and name. – Use Channel Editor to sort the channels as user-desired channel numbers. Hospitality Mode Standalone Network SI Vendor Widget Solution Power On System Channel Menu OSD Clock Music Mode Channel Editor Remote Jack Pack External Source...
- Page 34 Smoovie On sequence Smovie TV used (Air/ Cable ) Mixed Channel Map On (Air and Cable both used) Only Air or Cable used Only Air or Cable used Step If the tv starts with Hotel P&P If P&P already done If the tv starts with Hotel P&P If P&P already done Do the P&P, except channel...
- Page 35 Channel List You can view channel information, All, TV, Radio, Data/Other, Analogue or Favourites 1-5. ✎ When you press the CH LIST button on the remote control, Channel List screen displays immediately. Contents Home Channel List Guide AllShare Play Schedule Manager Source Return * The displayed image may differ depending on the model.
- Page 36 How to use Schedule Viewing in Channel List (digital channels only) When you set the Schedule Viewing in Channel List, you can only set the programme in Programme View. 1. Press the CH LIST button, then select a desired digital channel. 2.
- Page 37 Using Option Menu t Set each channel using the menu options (Edit Favourites, Lock/Unlock, Delete, Deselect, Select All). 1. Press the TOOLS button in Channel List screen, then select the Edit Mode. A check box appears to the left of the channel.
- Page 38 My Channel ¦ Determines the country and genre for the channels provided by the hotel, and if the user selects a country and genre, shows the corresponding channels. • You must select the country first, or you can not set a genre. • If you select the genre without adding any channels, the channel list displays all of the available channels.
- Page 39 ✎ NOTE • This section describes the layout of the Front UI that appears when the TV is turned on. (Factory Mode > Genre Mode: Enable) • The genre is a sub-list for each country. • The broadcast screen that was being displayed the last memorial channel. –...
- Page 40 Highlight Interaction [Country Items] • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. ✎ NOTE • Users can navigate the items in each country & genre list by pressing the up or down remote control keys. • Circular navigation is supported.
- Page 41 Highlight Interaction [Default Genre] • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. My Channel My Channel Current status : All Country/Sports Current status : All Country/Sports Country Genre Country Genre ▲...
- Page 42 Mode Change Interaction 1 (1/2) • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. My Channel My Channel Current status : All Country/Sports Current status : All Country/Sports Country Genre Country Genre ▲...
- Page 43 Mode Change Interaction 1 (2/2) • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. My Channel Current status : All Country/Sports Country Genre ▲ All Country Austria News Genre Mode change to Austria/News. Info Belgium (Dutch) Radio...
- Page 44 Mode Change Interaction 1 (1/2) • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. My Channel My Channel Current status : All Country/Sports Current status : All Country/Sports Country Genre Country Genre ▲...
- Page 45 Power On Scenario [Last Memory] • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. POWER Current Status : Austria / News Power Off • Current Genre Mode : All Country / Sports POWER My Channel Current status : All Country/Sports...
- Page 46 Genre Editor: This configures the genres of each of the hotel TV channels. • This can be used through the Hotel Menu (Factory). • Supported genres include News, Radio, Entertainment, Sports and Hotel. • More than one genre can be selected for each channel at the same time. Country Editor (Channel Editor): This is the editor that configures the country for each of the hotel TV channels.
- Page 47 Elements Name Description • When the user enters this screen, the currently selected default item is highlighted. • The Country Icon + Category Name are provided. (If the highlight is in the Main Frame, only the icon is displayed.) • Moving the highlight –...
- Page 48 ✎ NOTE • This is a definition of the Tools menu in the Left Frame Category. • Only the Info item for each Register/Country is provided. Elements Category Tools menu Descriptions Registered, Country Information Registered Channels. The number of channels of each country. • The items are displayed without ‘Channel’.
- Page 49 ✎ NOTE • This is the component for when there are no channels registered to the country category. Elements Description Description The message is displayed when the currently selected country does not contain any items. Main Frame [Channel Browser] English...
- Page 50 Key Guide Button Action Nav. Help CH UP/DOWN Moves the page. Page ENTER Selects or enters the corresponding Channel Browser area. Select RETURN Returns to the previous step (Factory Mode). Return UP/DOWN Moves the highlight up or down. (No Guide) RIGHT Moves the highlight to the Channel Browser area.
- Page 51 Channel Common Elements [+ Icon-method] Channel list representation rules Construction Standard Item • Check Box + Status Icon + Digital Channel Number + Channel Name Digital channels • Channel number representation format: ###-### (The channel number is represented by ‘-’.) ATSC • Check Box + Analog Icon + Analog Channel Number + Channel Name Analog channels • Channel number representation format: ### (‘-’...
- Page 52 Add to Countries / Edit Countries (1/2) • Channel Manager > Browser > Tools > Add to Countries Key Guide Button Action Nav. Help Selects the highlighted item. Enter ENTER Cancels and returns to the previous screen (Tools). Return RETURN UP/DOWN Moves the highlight over country items.
- Page 53 Elements Name Description • If there are no channels that have been registered to the country list in the Add to Countries selected channels, “Add to Countries” is displayed as the title. Window • A check box is displayed depending on whether the country that was selected when entering the screen is registered or not.
- Page 54 Key Guide Button Action Nav. Help ENTER Selects the highlighted item. Enter RETURN Cancels and returns to the previous screen (Tools). Return UP/DOWN Moves the highlight over country items. Move LEFT/RIGHT Moves the highlight. Move INFO Closes the current window and displays the ‘Tools’ menu. (No Guide) TOOLS EXIT...
- Page 55 Key Guide Button Action Nav. Help Applies the changes and closes the window. Enter ENTER RETURN Cancels and returns to the previous screen (Tools). Return Changes the channel number of the selected channel. Adjust Enters a digit. Number INFO TOOLS Closes the current window and displays the ‘Tools’...
- Page 56 Edit the Channel Number [External Input] (3/3) • Channel Manager > Browser > Tools > Edit Channel Number Key Guide Button Action Nav. Help If a user presses the button, the channel number is initialized. Reset ENTER Applies the changes and closes the window. Enter RETURN Cancels or returns to the previous screen (Tools).
- Page 57 Elements Name Description • The channel number area. – Both the numeric keys and the Up/Down keys are supported. – If no value is allocated, as many ‘-’ are displayed as the number of digits. ▲ ▲ ▲ Channel Number Area →...
- Page 58 Elements Name Description Channel Name Edit Window • The cursor and the character that are currently being entered are in the same colour as the highlight. Channel Name • When the maximum number of characters is reached, the cursor disappears. Keyboard • For a detailed scenario, refer to the keypad design document. Tools [Edit Mode] Edit Mode Content Highlight (when the number of the checked item is 0 or 1)
- Page 59 CH Banner [when a channel number is allocated to an external input] ✎ NOTE • The TV channel banner specifications are applied. • When there is an unsupported item or there is no corresponding information, the item values are not displayed. • The channel name is represented as the ‘external input name’.
- Page 60 • Samsung Sound-Bars and Hospitality TV – Use Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI. If you connect a compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to theTV’s sound through the Sound-Bar.
- Page 61 Security mode ¦ Design Specifications • This is to restrict some functions such as TTX and external source (HDMI, USB) input in specific facilities such as a correctional facility. • The Security menu is password-protected. Access to the Security menu is denied without the password. • Security Setting –...
-
Page 62: Installing The Wall Mount
Contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own. -
Page 63: Securing The Tv To The Wall
Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration, depending on the manufacturer. -
Page 64: Specifications
Operating Humidity 10% to 80%, non-condensing Storage Temperature -20°C to 45°C (-4°F to 113°F) Storage Humidity 5% to 95%, non-condensing Model Name HG40ED790 Display Resolution 1920 x 1080 Stand Swivel (Left / Right) -20˚ ~ 20˚ Screen Size (Diagonal) 40.0 inches... -
Page 65: Dimensions
Dimensions Front view / Side view (Unit: mm) HG40ED790 930.4 545.0 555.1 620.9 30.7 48.1 241.3 Jack panel detail / Rear view (Unit: mm) HG40ED790 365.2 194.3 148.5 90.6 256.3 131.5 103.9 English... - Page 66 Base Stand detail (Unit: mm) 548.9 195.0 241.3 ✎ NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. English...
-
Page 67: Licence
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274 Open Source License Notice Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source Licence Notice is written only English. - Page 68 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre Web Site AUSTRIA 0800-SAMSUNG (0800-7267864) www.samsung.com/at/support BELGIUM 02-201-24-18 www.samsung.com/be/support (Dutch) www.samsung.com/be_fr/support (French) BOSNIA 055 233 999 www.samsung.com/support...