Customizing Settings - LG 23CAT42K-B.AUS Owner's Manual

CUSTOMIZING SETTINGS

1
Press the desired button on the bottom of the Monitor set.
2
Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.
To return to the upper menu or set other menu items, use the up arrow (
3
Select EXIT to leave the OSD menu.
Button
MENU
VOL
CLOUD
AUTO
INPUT
EXIT
(Power Button)
Activates the main menu.
OSD Lock/Unlock Locks/unlocks the OSD screen.
Functions y To lock the OSD screen, press and hold the MENU button
y To unlock the OSD screen, press and hold the MENU
Adjust the volume of the monitor.(only works in Cloud mode)/the left arrow key.
Disconnects the connection when the key is pressed for a few seconds while in Cloud
mode;the right arrow key.
To adjust the monitor settings, press the AUTO button on the MONITOR SETUP OSD
menu (only supported for analog signal).
For optimal screen display, use the following resolution.
Optimal Resolution 1920 x 1080
Allows selection of the input signal.
y If you connect the monitor to a computer using a D-SUB cable, select either the
CLOUD or D-SUB input signal.
y The initial input signal is D-SUB.
Exits the OSD menu.
y D-SUB Input: Power On/Off
y CLOUD Input
Monitor Off: Press the power button once then the monitor will be turned off after 5
seconds.
CLOUD Off: Press the power button twice then the monitor and CLOUD connection
will be disabled.
CLOUD On: Press the power button.
Power Indicator When the monitor is in operating mode, the power indicator
will turn Red (on mode).
When the monitor is in power saving mode, the power indica-
tor will blink Red.
CUSTOMIZING SETTINGS
) button.
Monitor set Buttons
Description
for several seconds. The "OSD LOCKED" message will be
displayed and the screen will be locked.
button again for several seconds. The "OSD UNLOCKED"
message will be displayed and the screen will be unlocked.
17