H
ow to use washer
1. Special function display
• When Child lock is selected, the "
displayed
• When time delay is selected, it shows the
remaining time before the finish of the
selected program.
I Est. Time Remaining
• This display shows the estimated time
remaining in the cycle when operating.
• This washer automatically detects the wash
load (weight) and optimizes the washing
time. After detecting, the display will show
the adjusted time remaining.
I Status Indicator
• It shows elapsed time of the cycle the washer
is operating.
2. Self diagnose display
• If the washer encounters a fault during
operation, the associated fault will be
displayed.
"
" : Water pressure sensing error
"
" : Problem of overfilling water
"
" : Door is not closed
"
" : Over load in motor
"
" : Water inlet trouble
"
" : Drainage trouble
"
" : Unbalanced load
"
" : Water temperature trouble
"
" : Dry heater or thermostat trouble.
If these error letters are displayed, please refer to
the troubleshooting page35 and follow the guide.
Display
3. Completion of washing
• When washing cycle is completed,
"
" is displayed on the "Multi display".
4. Time left
" is
• During washing cycle, the remaining washing
time is displayed.
• Recommended program by manufacturer.
- Refresh: around 30 minutes
- Silent: around 1 hour and 10 minutes
- Cotton: around 2 hours and 43 minutes
- Heavy Duty: around 1 hour and 59 minutes
- Sanitary: around 1 hour and 59 minutes
- Speed Wash: around 49 minutes
- Rinse+Spin: around 18 minutes
- Duvet: around 1 hour and 30 minutes
- Wool: around 52 minutes
- Cold Wash: around 1 hour and 32 minutes
- Dark Wash: around 1 hour and 7 minutes
- Sports Wear: around 1 hour and 12 minutes
• The washing time may vary by the amount
of laundry, water pressure, water
temperature and other washing conditions.
• If an unbalanced load is detected or if the
suds removing program operates, the wash
time may be extended.
(Max. increasing time is 45 minutes.)
27