LG DLEX8000V Owner's Manual page 38

38
hOW TO USE
Steam functions (cont.)
LG's steam technology allows you to inject fabrics with a swirling
jet of hot steam to refresh clothes, reduce static, simplify ironing
and assist in the removal of
lightly stained spots. Simply select the STEAM FRESHTM or
SpotClean™ cycle, or you can add a Steam option to select cycles.
tm
using the steam fresh
STEAM FRESH™ uses the power of steam alone to quickly reduce
wrinkles and odor in fabrics. It brings new life to wrinkled clothes
that have been stored for an extended time and makes heavily
wrinkled clothes easier to iron. STEAM FRESH™ can also be used
to help reduce odors in fabrics.
NOTE
• REDUCE STATIC or EASY IRON options can also be used during
the STEAM FRESH™ cycle.
• Depending on the load (quantity of items), you may change
the amount of time for the cycle by pressing the MORE TIME
or LESS TIME button. The display will show 3, 5, or
means 3 or fewer items, 5 is for 4 or 5 items, and
indicates a large load such as a comforter.
tm
to use the steam fresh
1. Turn on the dryer and turn the cycle selector knob to select the
STEAM FRESH ™ cycle.
2. To add an option function, select REDUCE STATIC, EASY IRON, or
WRINKLE CARE.
3. Depending on the load (quantity of items), steam time can be
changed by pressing the MORE TIME or LESS TIME buttons.
4. Press START/PAUSE button to start the cycle.
to add steam to a standard cycle:
1. Turn on the dryer and turn the cycle selector knob to select the
desired cycle.
2. Use the cycle setting buttons to adjust the settings for that
cycle.
3. Press the Steam option button for the Steam option you would
like to add. Then adjust for the load size using the MORE TIME
or LESS TIME buttons.
4. Press START/PAUSE button to start the cycle.
cycle
. 3
cycle:
using the steam options:
The REDUCE STATIC option injects steam late in the drying cycle
to reduce the static electricity caused by dry fabrics rubbing
together. Change the amount of time for the cycle by pressing the
MORE TIME or LESS TIME button, depending on the load (quantity
of items). The display will show the recommended number of
items, such as 7, 9, 11, 14, 16, or 18.
The EASY IRON option provides uniform, properly dampened
fabrics for ironing, which can save time and make ironing easier.
Change the amount of time for the cycle by pressing the MORE
TIME or LESS TIME button, depending on the load (quantity of
items). The display will show the recommended number of items,
such as 1, 2, 3, 4, or 5.
NOTE
• When Sensor Dry is selected with the REDUCE STATIC option,
a Dry level of Les or DAMP cannot be selected.
• The REDUCE STATIC or EASY IRON option may also be selected
during TIME DRY cycles.
• After the Steam option is selected in TIME DRY, the MORE
TIME or LESS TIME buttons will change the steam time ONLY.
• After pressing START/PAUSE, the MORE TIME or LESS TIME
buttons will be disabled.
using the steam sanItary
STEAM SANITARY™ cycle is ideal for sanitizing non washable items
quickly and easily using the power of steam alone. Recommend
to use this cycle for cotton and polyester material. (Do NOT use
for urethane foam, down feathers or delicates items)
tm
using the spot clean cycle
The SPOT CLEAN™ uses the power of steam to reduce wrinkles
and odor in fabrics but also to help the stain removal solution's
performance. Stain removal solutions are designed to be used for
on-the-spot stain treatment
NOTE
• SPOT CLEAN™ should only be used on light water-soluble
stains.
• The SPOT CLEAN™ does not perform as well on dissoluble
stain, non-food/drink stain and tough/old stain.
• The spot clean cycle must be used immediately after
treatment with the stain removal solution.
tm
to use the spot clean
1. Remove excess residue from the stain with a damp towel or
napkin.
2. Apply "STAIN REMOVAL SOLUTION" onto the stain.
3. Load the pre treated item into the dryer and select and start the
spot clean cycle.
tm
cycle
cycle