Table of Contents
Advertisement
2 Operate the on-screen menu using the four respective projectors to divide the image into four portions.
Display [DISPLAY] → [MULTI SCREEN] → [PICTURE SETTING] Screen in the on-screen menu and select [TIL-
ING].
(1) I n the screen for setting the number of horizontal units, select [2 UNITS]. (number of units in the horizontal
direction)
(2) I n the screen for setting the number of vertical units, select [2 UNITS]. (number of units in the vertical direction)
(3) I n the screen for setting the horizontal order, select [1st UNIT] or [2nd UNIT].
(look at the screens, the one on the left is the [1st UNIT] while the one on the right is the [2nd UNIT])
(4) In the screen for setting the vertical order, select the [1st UNIT] or the [2nd UNIT].
(look at the screens, the one at the top is the [1st UNIT] while the one at the bottom is the [2nd UNIT])
3 Adjust the lens shift of each projector to fine-tune the boundaries of the screen.
For further fine-tuning, adjust using [DISPLAY] → [EDGE BLENDING] in the on-screen menu for each projector.
For details, please refer to "4-3 Displaying a Picture Using [EDGE BLENDING]".
(→ page 74)
68
4. Multi-Screen Projection
Advertisement
Table of Contents
