Connecting A Flat-Panel Display - Sony VAIO PCG-V505BH Manual

Connecting a Flat-Panel Display

The port replicator includes a Digital Visual Interface (DVI) port, which enables you to connect your computer to a flat-panel
display. To connect to a flat panel display, you must use a DVI-D or DVI-D/I display cable. If you wish to purchase a cable,
contact your local retailer.
Your port replicator also includes a Monitor (VGA) port. For Monitor port connections, see
Projectors for more information.
To connect the computer to a flat-panel display
1. Connect the computer to the port replicator. See
2. Plug the flat-panel display into an AC outlet.
3.
Plug the display cable into the DVI port
4.
Turn on the computer and flat-panel display.
5.
Press the Fn+F7 keys to toggle the display between your computer, the flat-panel display, or both the computer
and flat-panel display. See
You cannot use the Monitor (VGA) port on your computer when a port replicator is connected to the computer. Use the
DVI or Monitor (VGA) port on the port replicator instead.
Connecting a Flat- Panel Display
Connecting a Port Replicator
on the computer flat-panel display.
Selecting a display for more information.
Using Computer Monitors and
for more information.
Page 106