Connecting A Flat-Panel Display - Sony PCG-Z1WA VAIO User Guide (primary manual) User Manual

Vaio® laptop computers: vaio® notebook computer
Hide thumbs Also See for PCG-Z1WA VAIO User Guide (primary manual):
Table of Contents

Advertisement

Connecting a Flat-Panel Display

The port replicator includes a Digital Visual Interface (DVI-D) port, which enables you to connect your computer to a
flat-panel display. To connect to a flat panel display, you must use a DVI-D or DVI-D/I display cable. If you wish to purchase
a cable, shop Sony online at
Your port replicator also includes a Monitor (VGA) port. For Monitor port connections, see
Projectors
for more information.
To connect the computer to a flat-panel display
1.
Connect the computer to the port replicator. See
2.
Plug the flat-panel display into an AC outlet.
3.
Plug the display cable into the DVI port
4.
Turn on the computer and flat-panel display.
5.
Press the Fn+F7 keys to toggle the display between your computer, the flat-panel display, or both the computer
and flat-panel display. See
You cannot use the Monitor (VGA) port on your computer when a port replicator is connected to the computer. Use the
DVI or Monitor (VGA) port on the port replicator instead.
Connecting a Flat- Panel Display
http://www.sonystyle.com/vaio
on the port replicator.
Selecting a display
for more information.
or contact your local retailer.
Connecting a Port Replicator
Using Computer Monitors and
for more information.
Page 129

Advertisement

Table of Contents
loading

Table of Contents