LG LW1212HR Owner's Manual page 14

Installation
9. Attach each Frame curtain the window sash
using screws (Type C).(See Fig. 6)
Do not drill a hole in the bottom pan.
The unit is designed to operate with
approximately 1/2" of water in bottom pan.
10. Slide the unit into the cabinet.(See Fig. 7)
For security purpose, reinstall screws(Type A) at
cabinet's sides.
11. Cut the foam-strip
and insert between the upper window
sash and the lower window sash.
(See Fig. 8)
12. Attach the window locking bracket
a type C screw. (See Fig. 9)
13. Attach the front grille to the cabinet by
inserting the tabs on the grille into the
tabs on the front of the cabinet. Push the
grille in until it snaps into place. (See
Fig.10)
14. Lift the inlet grille and secure it with a type
A screw through the front grille.
(See Fig. 11)
15. Window installation of room air conditioner
is now completed. See ELECTRICAL DATA
for attaching power cord to electrical outlet.
14 Room Air Conditioner
to the proper length
with
11
Screw(Type A)
Screw(Type A)
Window locking bracket
Type C
7
Fig. 6
Power cord
Fig. 7
Foam-Strip
8
Fig. 8
11
Fig. 9
Fig. 10
Fig. 11