Advertisement
P
roduct view
Handle Assembly
DC Adapter
A
ssembly
The Supreme Sweep Compact requires very little
assembly. remove it from the box and check it
against the illustration to familiarize yourself with
the components listed. The exploded view dia-
gram with part names will also be helpful if you
should need to order a part at a later time.
1. Assemble the handle by taking the section
with the non-slip grip (1) and the middle
section which has grey connector pieces on
each end (2). Insert the middle section (2)
into the grip section (1) and twist to tighten
into place. Next, take this assembled section
and insert into the bottom section with a hole
(3). Twist to tighten into place.
2.
Take the assembled handle and line up
the bottom hole with the button on the
swivel connector on top of the Supreme
Sweep Compact. Push the button on the
swivel connector down while pushing the
assembled handle over the button, locking
the handle into place.
3.
The Supreme Sweep Compact must be fully
charged before using. To charge the unit,
plug the charger into a standard electrical
outlet (230-240v-50hz); plug the opposite
end into the charging port on the back side
of your Supreme Sweep Compact. The
charging indicator light will illuminate when
properly connected and will not turn off
when fully charged. The Supreme Sweep
Compact is now charging.
note: the power switch must be in
the off position when charging.
4
w w w . b i s s e l l . c o m
Charging Port
Non-Slip
Handle Grip
Metal Extension
Handle Assembly
Swivel Connector
Charging Indicator Light
Power Switch
Dirt Container Release
WaRning:
Electric/electronic appliances
should not be subjected to extreme
temperatures or high humidity.
Do not store the Supreme Sweep
Compact in bathing areas or close
to stoves, furnaces or radiators.
Handle Assembly
1 2 3
Charging Port
1
2
3
Advertisement
