Bissell 2680 Quick And Easy Assembly

perfect
SWEEP
CORDLESS SWEEPER
Quick and Easy Assembly
Lay four handle sections out in a line with
1
the handle grip at the top and the threaded
hole at the bottom.
Fit smaller tapered end of section into larger
2
end of the next one and push together for
a snug fit.
With pieces assembled, strike down on
3
a hard surface to firmly lock sections
together. (Use a book or magazine to
protect your floor).
Lift the bail (threaded metal bar on the
4
top of sweeper) to vertical position. Screw
sweeper handle all the way down to the
"shoulder" of the threaded metal bail. Failure
to do this could cause the bail to break.
Snap brush comb on handle.
5
To learn more about this product visit:
www.bissell.com or call us at: 1.800.237.7691
™
Part # 010-3803