LG 42LN549D.BTRYLJL Owner's Manual page 10

10
ASSEMBLING AND PREPARING
Attaching the TV to a table
(Only 42LN549D)
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product.
4-Screws
(not provided as parts of the product)
Screws: M5 x L (*L: Table depth + 8-10 mm)
ex) Table depth: 15mm, Screw: M5 x 25
Securing the TV to a table
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
To secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
WARNING
To prevent TV from falling over, the TV should be
y
securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the TV
may cause injury.
Stand
Table
Adjusting the angle of the TV to suit view
(Only 32LN54**, 32LP36**, 32LP62**)
Swivel 15 degrees to the left or right and adjust the angle
of the TV to suit your view.
15˚
15˚
(Only 42LN549D)
Swivel 90 degrees to the left or right and adjust the angle
of the TV to suit your view.
90˚
90˚
CAUTION
When adjusting the angle of the product, watch
y
out for your fingers.
» Personal injury may occur if hands or fingers are
pinched. If the product is tilted too much, it may fall,
causing damage or injury.
15˚
15˚
90˚
90˚