Connecting; Connecting The Ac Adapter; Hdmi Connecting To Your Tv; Resolution Setting - LG SP520 Owner's Manual

12

Connecting

Connecting the AC
adapter
Connect the unit to the power supply with the
supplied AC adapter.
Connect the power cord to the adapter, and then
plug the other end into an AC outlet.
Rear of the unit
2
AC adapter
AC power cord
y Contact an electrical parts distributor for
assistance in selecting a suitable AC plug adapter
or AC power cord set.
y This AC adapter is manufactured by Asian Power
Devices Inc.
>
Caution
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
HDMI connecting to
your TV
If you have a HDMI TV or monitor, you can connect
it to this unit using a HDMI cable (Type A, High
Speed HDMI™ Cable). Connect the HDMI jack on
the unit to the HDMI jack on a HDMI compatible TV
or monitor.
Plug into a
power source
Set the TV's source to HDMI (refer to TV's Owner's
manual).
,
y If you select a resolution manually and then
y If you select a resolution that your TV
y The 1080p video output frame rate may
Rear of the unit
HDMI cable
(not supplied)
Note
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
does not accept, the warning message
will appear. After changing resolution,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
be automatically set to either 24 Hz or 60
Hz depending both on the capability and
preference of the connected TV.
TV