Safety Precautions - Panasonic TH-55CQ1 Operating Instructions Manual

75-inch model 65-inch model
50-inch model 43-inch model
IMPORTANT: THE MOULDED PLUG
FOR YOUR SAFETY, PLEASE READ THE
FOLLOWING TEXT CAREFULLY.
This display is supplied with a moulded three pin
mains plug for your safety and convenience. A 5 amp
fuse is fitted in this plug. Shall the fuse need to be
replaced, please ensure that the replacement fuse
has a rating of 5 amps and that it is approved by
ASTA or BSI to BS1362.
Check for the ASTA mark
the body of the fuse.
If the plug contains a removable fuse cover, you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from
your local Panasonic dealer.
Do not cut off the mains plug.
Do not use any other type of mains lead except the
one supplied with this display.
The supplied mains lead and moulded plug are
designed to be used with this display to avoid
interference and for your safety.
If the socket outlet in your home is not suitable, get it
changed by a qualified electrician.
If the plug or mains lead becomes damaged,
purchase a replacement from an authorized dealer.
How to replace the fuse.
Open the fuse compartment with a screwdriver and
replace the fuse.
6
English
55-inch model
or the BSI mark on

Safety Precautions

WARNING
■
Setup
When installing the wall hanging bracket, read the
operating instructions supplied with it carefully and install
properly.
We are not responsible for any product damage, etc.
caused by failures in the installation environment for
the pedestal or wall hanging bracket even during the
warranty period.
Small parts can present choking hazard if accidentally
swallowed. Keep small parts away from young children.
Discard unneeded small parts and other objects,
including packaging materials and plastic bags/sheets to
prevent them from being played with by young children,
creating the potential risk of suffocation.
Do not place the display on sloped or unstable
surfaces, and ensure that the display does not hang
over the edge of the base.
The display may fall off or tip over.
•
Install this unit at a location with minimal vibration
and which can support the weight of the unit.
Dropping or falling of the unit may cause injury or
•
malfunction.
Cautions for Wall or Pedestal Installation
The installation should be performed by an installation
•
professional. Installing the display incorrectly may
lead to an accident that results in death or serious
injury.
When installing on a wall, the specified wall hanging
•
bracket or a wall hanging bracket that conforms to
VESA standards must be used.
Some wall hanging brackets cannot be used due
•
to the structure of the product. Check the product
drawing before using.
: VESA 600 × 400
86-inch model
: VESA 400 × 400
75-inch model
: VESA 400 × 200
65-inch model
: VESA 400 × 200
55-inch model
: VESA 400 × 200
50-inch model
: VESA 200 × 200
43-inch model
(see page 9)
Before installation, be sure to check if the mounting
•
location has enough strength to support the weight of
the display and the wall hanging bracket for anti drop.
If you terminate the use of the product, ask a
•
professional to remove it promptly.
When mounting the display on the wall, prevent the
•
mounting screws and power cable from contacting
metal objects inside the wall. An electric shock may
occur if they contact metal objects inside the wall.