Table of Contents
Advertisement
Replacing the activated charcoal filter
To bind odours in circulating-air mode, you must
Note:
install an activated carbon filter. The different options for
operating the appliance in circulating-air mode can be
found in the brochure. Alternatively, ask your dealer.
The required accessories are available from specialist
retailers, from customer service or from the Online
Shop.
Open the cover on the top of the appliance.
1.
Remove the old activated charcoal filter and insert
2.
the new one.
Close the cover.
3.
Reset the saturation indicator.~ "Saturation display"
4.
on page 6
3Trouble shooting
M alfunctions often have simple explanations. Please
T r o u b l e s h o o t i n g
read the following notes before calling the after-sales
service.
:
Warning
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Malfunction table
Problem
Possible cause
The appliance
The plug is not
does not work
plugged in.
Power cut
Faulty fuse
The lighting does
The LED lights
not work.
are defective.
The button illumi-
The control unit is
nation does not
faulty.
work.
--------
LED lights
Defective LED lights may be replaced by the
manufacturer, their customer service or a qualified
technician (electrician) only.
:
Warning
Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly
into the switched on LED lights for longer than 100
seconds.
Trouble shooting en
Solution
Connect the appliance to the
electricity supply
Check whether other kitchen
appliances are working
Check in the fuse box to make
sure that the fuse for the
appliance is OK
Call the after-sales service.
Call the aftersales service.
9
Advertisement
Table of Contents
