Fixed Dial Number (Fdn); Change Codes; Connection; Gprs Attach - LG CG300 User Manual

CG300 Cingular E_060831_1.1 2006.9.1 2:7 PM 페이지73
n
Note
Before setting to Off the PIN code request feature, you must
enter your PIN
The following [Options] are available:
]
Enable: You must enter the PIN each time the phone
is switched on.
]
Disable: The phone connects directly to the network
when you switch it on.

Fixed Dial Number (FDN)

Allows you to restrict your outgoing calls to selected
phone numbers, if this function is supported by your
SmartChip. The PIN2 code is required.
The following options are available:
]
Disable: You can call any number.
]
Enable: You can only call phone numbers stored in
the Address Book. You must enter your PIN2.
]
Number List: You can view the number list saved as
fixed dial number.
Note
Not all SIM cards have a PIN2. If your SmartChip does not,
this menu option is not displayed.
(Menu 9.6.2)

Change Codes

(Menu 9.6.3)
The Change codes feature allows you to change your
current password to a new one. You must enter the
current password before you can specify a new one.
You can change the access codes for: Security Code,
PIN1 Code, PIN2 Code
n
Note
PIN: Personal Identification Number.

Connection

GPRS Attach

(Menu 9.7.1)
If you select Power On and you are in a network that
supports packet data, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive e-mail, is quicker. If
you select When Needed, the phone will use a packet
data connection only if you start an application or
action that needs it. The GPRS connection is closed
after it is not used by any application.
Settings
Menu 9.7
73