Table of Contents
Advertisement
3�5
Insert the remote control
batteries
1.
Slide the battery cover off the back of the
remote control.
2.
Insert the two supplied batteries (Size AAA,
Type LR03). Be sure the + and - ends of the
batteries line up with the markings inside
the case.
3.
Slide the cover back into position.
Note
D
Remove the batteries if not using the
remote control for an extended period of
time.
3�6
Switch on the TV
The first time you switch on the TV, check that
the mains cord is properly connected. When
ready, turn on the mains (if mains switch is
available), then press POWER on the side of
the TV.
Note
D
Certain TV models require you to press
and hold POWER for up to two seconds.
A beep sound indicates that your TV is
switched on. Your TV may take up to 15
seconds to start.
EN-10
3�7
First time setup
1.
The first time the TV is switched on, a
language selection menu appears.
Please select your
language...
using cursor up and
down
Next
Select your language and follow the
on-screen instructions to setup the TV.
Tip
E
If you select the wrong language, press the
red key on the remote control to return to
the language selection menu. You can change
the menu language or reinstall channels as
described in Section 6 Install channels.
Menu language
English
Español
Français
Hrvatski
Italiano
Magyar
...
Advertisement
Table of Contents
