BenQ MX604 User Manual page 34

Selects a baud rate that is identical with your computer's so that you can connect
Baud Rate the projector using a suitable RS-232 cable and update or download the projector's
firmware. This function is intended for qualified service personnel.
Adjusts the equalizer gain settings for an HDMI signal. The higher the setting, the
HDMI
stronger the gain value. If there are more than one HDMI port on the projector,
Equalizer
select the HDMI port first before adjusting the value.
USB Power Disables or enables "Type A connector" 5V power output for QCast Mirror HDMI
wireless dongle.
Switch
Returns all of the adjustments you've made for the Settings menu to the factory
Reset Settings
preset values.
System
Language Sets the language for the On-Screen Display (OSD) menus.
• Monitor Out: Allows the projector to output a VGA signal when it is in standby
Standby
• Audio Pass Through: The projector can play sound when it is in standby mode
Settings
•
Background
• Splash
Settings
• Menu Type: Switches to the Basic OSD menu.
Menu Settings
• Menu Display Time: Sets the length of time the OSD will remain active after
• Mute: Temporarily turns off the sound.
• Volume: Adjusts the sound level.
• Power On/Off Ring Tone: Turns on or off the ring tone when the projector is
Audio
Settings
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.
• Closed Caption Enable: Activates the function by selecting On when the
Closed
Captions: An on-screen display of the dialogue, narration, and sound effects of TV programs and
Caption
videos that are closed captioned (usually marked as "CC" in TV listings).
• Caption Version: Selects a preferred closed captioning mode. To view captions,
34 Menu operation
mode and the PC jack and the MONITOR OUT jack are correctly connected to
devices.
and the corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
make the connection.
Background: Sets the background color for the projector.
Screen: Allows you to select which logo screen will be displayed during
projector start-up.
your last key press.
in startup and shutdown process.
selected input signal carries closed captions.
select CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language
in your area).
Connection on page 18
/ to
for how to