BenQ MX604 User Manual page 10

6. SOURCE
Displays the source selection bar.
7. ECO BLANK
Used to hide the screen picture.
Do not block the projection lens from
projecting as this could cause the blocking
object to become heated and deformed or
even cause a fire.
8. OK
Confirms the selected On-Screen Display
(OSD) menu item.
9. AUTO
Automatically determines the best picture
timings for the displayed image when PC signal
(analog RGB) is selected.
10. MENU
Turns on the On-Screen Display (OSD) menu.
11. Source selection button: PC 1
Selects PC 1 input source for display.
12. Arrow keys ( ,
When the On-Screen Display (OSD) menu is
activated, these keys are used as directional
arrows to select the desired menu items and
to make adjustments.
Keystone keys (
Displays the keystone correction page.
Volume keys ( ,
Decreases or increase the projector volume.
13. FREEZE
Freezes the projected image.
14. PAGE+/PAGE-
Operate your display software program (on a
connected PC) which responds to page
up/down commands (like Microsoft
PowerPoint).
10 Introduction
, , )
, )
)
15. ZOOM+/ZOOM-
Magnifies or reduces the projected picture
size.
16. CC
Displays the Closed Caption menu.
17. 3D SETTINGS
Displays the 3D menu.
18. ASPECT
Selects the display aspect ratio.
19.
Toggles projector audio between on and off.
20. Volume keys
Decreases or increase the projector volume.
21. SMART ECO
Displays the Lamp Mode menu for selecting
a suitable lamp operating mode.
22. INFO
Displays the projector information.
23. QUICK INSTALL
Quickly selects several functions to adjust the
projected image and displays the test pattern.
/