Restarting The Air Conditioner Automatically; Using The Mode Function - LG BSNQ246C8A2 Owner's Manual

Restarting the Air Conditioner
Automatically
When the air conditioner is turned on again after a power
failure, this function restores the previous settings.
Disabling Auto Restart
1
Open the front cover(Type1) or horizontal
vane(Type2).
2
Press the ON/OFF button and hold it about 6
seconds, then the unit will beep twice and the lamp
will blink twice 4 times.
• To re-enable the function, press the ON/OFF
button and hold it for 6 seconds. The unit will
beep twice and the lamp will blink 4 times.
Type1
Type2
ON/OFF
NOTE
• The feature may be changed according to the type of
model.
• If you press and hold the ON/OFF button for 3 – 5
seconds, instead of 6 seconds, the unit will switch to
the test operation. In the test operation, the unit blows
out strong cooling air for 18 minutes and then returns
to factory default settings.
16

Using the Mode Function

This function allows you to select the disired function.
Cooling Only Model
Cooling & Heating Model
ON/OFF
Cooling Mode
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Cooling Mode.
•
3
Press
temperature.
Cooling Mode
Auto Operation(AI) Mode
Dehumidification Mode
Fan Mode
Cooling Mode
Auto Changeover Mode
Dehumidification Mode
Heating Mode
Fan Mode
is displayed on the display screen.
or button to set the desired