Table of Contents
Advertisement
Magnifies or reduces the projected image size. After the Digital Zoom page
displays, press ZOOM+/ZOOM- to reduce or magnify the image to a desired size.
Press the directional arrows ( ,
navigate the picture.
Digital Zoom
The picture can only be navigated after it is magnified. You can further magnify the picture while
searching for details.
Returns all of the adjustments you've made for the Display menu to the factory
Reset Display
preset values.
Settings
Projector
See
Installation
Remote
Allows you to enable all the remote receivers or one specific remote receiver on
the projector.
Receiver
Auto Source
Allows the projector to automatically search for a signal.
Search
• On: Allows the projector to automatically determines the best picture timings for
Auto Signal
Adjustment
• Off: The projector will not respond when AUTO is pressed.
• Lamp Mode: See
Lamp Settings
• Reset Lamp Timer: See
• Lamp Timer: Displays the number of hours the lamp has been used.
Choosing a location on page
the displayed image when PC signal (analog RGB) is selected and AUTO is
pressed.
Setting the Lamp Mode on page
,
,
) on the projector or remote control to
12.
Resetting the lamp timer on page
38.
41.
Menu operation
33
Advertisement
Table of Contents
