Attaching The Stand - Samsung CF79 Series User Manual

Attaching the Stand

― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
Place the protective Styrofoam (cushion) included
in the package on the floor and place the product
facing down on the Styrofoam, as shown in the
image.
― Make sure to use the styrofoam (cushion) that came
with the monitor.
5
After attaching the stand, place the product in an
upright position.
2
Attach the stand to the back of the monitor, in the
direction of the arrow.
Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
3
B
A
Rotate A and B screws for fixing.
4
Grab the stand with one hand and use your other
hand to attach the COVER-STAND NECK LEFT in the
direction of the arrow.
Make sure that the arrow imprinted inside and the
▲OPEN outside of the COVER STAND NECK LEFT
are placed on the lower part. The COVER STAND
NECK LEFT cannot be attached if the imprints are
upside down.
18