Use A Kensington Lock - Philips 42PFL3605/60 User Manual

Enable or disable EasyLink
Note
• Do not enable Philips EasyLink if you do not
intend to use it.
1
Press MENU.
2
Press to select [Setup] >
[Installation] > [Preferences] >
[EasyLink].
3
Select [On] or [Off].
Use one-touch play
1
After enabling EasyLink, press play on
your device.
»
The TV automatically switches to the
correct source.
Use one-touch standby
1
Press (Standby-On) on the TV's or
device's remote control.
»
The TV and all connected HDMI
devices switch to standby.
Set TV speakers to EasyLink mode
When you play content from an EasyLink
compliant home theater, the TV speakers are
automatically muted.
1
Enable one-touch play and one-touch
standby between your Easylink compliant
devices by following the instructions
in the previous section (see 'Enable or
disable EasyLink' on page 28).
2
Press MENU.
3
Press to select [Setup] > [Sound]
> [TV speakers] > [Auto EasyLink].
»
The TV speakers are turned off
automatically when content from an
Easylink compliant system is detected.
28 EN
4
Press to select [Setup] > [Sound]
> [TV speakers] > [On] to disable
system audio control and enable the TV
speakers.
Note
•
To mute the TV speakers, select
speakers] > [Off].

Use a Kensington lock

There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
[TV