Finding Mac Addresses For Network Setup - Vizio D43-E2 User Manual

USING THE NETWORK CONNECTION MENU
Your TV is Internet-ready, featuring both an Ethernet port and built-in
high-speed Wireless-N.
Connecting to a Wireless Network
To connect to a wireless network whose network name (SSID) is be-
ing broadcast:
If your TV is connected to a network with an Ethernet cable,
you will not see the wireless network connection menu.
You must disconnect the Ethernet cable to set up a wireless
network connection.
1. Press the MENU button on the
remote. The on-screen menu is
VIZIO
displayed.
NETWORK
2. Use the Arrow buttons on the
Wired Connection
remote to highlight Network and
Wireless Access Points
press OK. The NETWORK menu is
displayed.
3. If you do not see your wireless
network displayed, highlight More
Access Points and press OK. The
More Access Points
WIRELESS ACCESS POINTS menu,
WPS
which is a list of available wireless
Manual Setup
networks, is displayed.
Hidden Network
4. Highlight the name of your wireless
Test Connection
network (this is the network's SSID)
and press OK.
5. Using the on-screeen keyboard, en-
ter your network's password, then
highlight Connect and press OK.
6. Press the EXIT button on the re-
mote.
Changing the Manual Setup Settings
Advanced users can fine-tune the network settings using the Manual
Setup feature.
To change advanced network settings:
1. From the NETWORK menu, highlight
Manual Setup and press OK. The
MANUAL SETUP menu is displayed.
2. To change the settings manually, use
the Arrow buttons on the remote
to highlight DHCP and then use the
Left/Right Arrow buttons to change
the setting to .
3. Use the Arrow and OK buttons to
adjust each setting:
Disconnected • IP Address - The IP address assigned Wide Zoom Normal Panoramic
to the TV.
• Subnet Mask - The subnet Exit 2D
Exit 2D 3D
• Default Gateway - Your network's
default gateway address.
ABC
• Pref. DNS Server - Your preferred
Input domain name server address. Wide CC
• Alt. DNS Server - Your alternate domain name server address.
Sleep
4. Use the Arrow buttons on the remote to highlight Save and
Picture Audio
Timer
press OK.
5. Press the EXIT button on the remote.
Network Settings Help

Finding MAC Addresses for Network Setup

The security settings on your router may require you to enter the
TV's MAC address in the router's settings.
To find the TV s MA address
VIZIO
1. From the NETWORK menu, highlight Manual Setup and press
MANUAL SETUP
OK. The MANUAL SETUP menu is displayed.
DHCP Off Wide Zoom
IP Address ___.___.___.___
2. Find the MAC address for the TV at the bottom of the list. The
Subnet Mask ___.___.___.___
MAC addresses for the connections in use are displayed:
Default Gateway ___.___.___.___
• RJ45 MAC - The Ethernet or RJ45 MAC address may be needed
Exit 2D
Pref. DNS Server ___.___.___.___
to set up your network when you have connected the TV to your
Alt. DNS Server ___.___.___.___
network when you have connected the TV to your network with
RJ45 MAC 0:0:0:0:0:0
an Ethernet (Cat 5) cable.
Wireless MAC 0:0:0:0:0:0
• Wireless MAC - The Wireless (WiFi) MAC address may be needed
Save
Input Wide
to connect your TV to your network with WiFi.
Cancel
Sleep
Picture
Timer
Network Settings
Normal Panoramic
3D
ABC
CC
Audio
Help
3
25