Husqvarna YT42DXL Operator's Manual page 20

SERVICE AND ADJUSTMENTS
A
• ATTACH FRONT LINK (E) - Insert flared ends of front
link (E) into slots in front mower bracket (H).
H
• ATTACH REAR LIFT LINKS (C) - Lift rear corner of
mower and position slot in link assembly over pin on
rear mower bracket (D) and secure with washer and
retainer spring.
• Repeat on opposite side of tractor.
C
D
B
Fig. 23
E
Fig. 24
C
D
• Check Front-To-Back Adjustment in "TO LEVEL
MOWER" in this section.
• Install belt onto electric clutch pulley (M).
IMPORTANT: CHECK BELT FOR PROPER ROUTING
IN ALL MOWER PULLEY GROOVES.
• Raise attachment lift lever to highest position.
See Mower Drive Belt Installation in "TO REPLACE MOWER
BLADE DRIVE BELT" in this section of the manual.
A
Fig. 27
20
C
D
Fig. 25
M
Fig. 26
M
E
H
B