Table of Contents
Advertisement
•
The voice activation light on the parent
unit goes on and the voice activation image
appears on the video display.
•
When the baby unit detects a sound,
the video display on the parent unit
automatically goes on to show the baby.
When no new sound is detected for
20 seconds, the video display goes out again.
To deactivate the voice activation mode, press
2
the voice activation button on the parent unit
again. The voice activation light goes out and
the voice activation off image appears on the
display.
5.5 Nightlight
Press the nightlight button on the base of the
1
baby unit to switch on the nightlight.
•
The nightlight on the base of the baby unit
goes on.
10
Press the nightlight button again to switch off
2
the nightlight.
5.6 Lullaby function
Press the lullaby play/stop button on the
1
parent unit to play a lullaby.
•
The lullaby starts to play on the baby unit
and is repeated continuously for approx.
15 minutes. On the video display you
see which lullaby number is played and
repeated. This number is shown in a blue
square.
To select another lullaby, press the lullaby
2
button. Continue pressing the 'next lullaby'
button until you hear the lullaby you prefer.
Note:
D
You can also select the repeat symbol to play
all lullabies repeatedly in a loop.
Advertisement
Table of Contents
