Connecting The Projector To Other Video Sources - Optoma EzPro 705 Manual

10
English

Connecting the Projector to Other Video Sources

v If your video player uses a round, one-prong composite video connector, you'll
need the video cable. If your video player uses a round, four-prong s-video
connector, you'll need the s-video cable ( See page 11 for detail information).
Both cables are shipped with the projector.
If you use the video cable:
1. Plug the video cable connector into the "Video out"port on your video player; plug
the other end into the "Video"port on your projector.
2. Plug the audio cable white connector into the left "Audio out" port on your video
player; plug the cable's red connector into the right "Audio out" port on the video
player; plug the other end into the "Audio in" port on your projector.
3. If you need to use an external speaker (built in amplifier), plug the audio cable white
connector into the "Audio in" port on your speaker; plug the cable's red connector into
the red "Audio in" port on the speaker; plug the other end into the "Audio out"
port on the projector.
4. Connect one end of the power cord into the back of projector; connect the other
end to an electrical outlet.
Video Output Audio Output
Video Cable
Audio In Port
Audio Cable
Video Port
Power Cord
Audio Cable
Audio Out Port