Table of Contents
Advertisement
LED Indicator
Select [On] to light up the LED indicator.
Select [Off] to disable it.
AV Set-up
Label Video Inputs: Assigns name to
external equipment input.
Enable
Select [Auto] to display names only
when the equipment is connected, or
[Always] to display regardless of
connection status.
Label Inputs
Uses one of the preset labels to assign a
name to connected equipment. Select
[Edit] to creates your own label.
Colour System: Selects the colour
system according to the composite
video signal from the input source.
Speakers: Select sound output from the
TV speakers or external audio
equipment.
Headphone/Audio Out: Sets the sound
output to headphone, external audio
systems or Active Subwoofer
connected to the TV. Disconnect
headphone from the TV when you
select [Audio out (Fixed)], [Audio out
(Variable)] or [Subwoofer].
Audio out (Fixed)
The audio output of the TV is fixed. Use
your audio receiver's volume control to
adjust the volume (and other audio
settings) through your audio system.
Audio out (Variable)
When using an external audio system,
volume output from audio out can be
controlled using the TV's remote control.
Headphone Speaker Link: Switches the
TV's internal speakers on/off when
you connect headphone to the TV.
Headphone Volume: Adjusts the
volume of the headphone.
Note
• This option is not available, when
[Headphone/Audio Out] is set to [Audio out
(Fixed)], [Audio out (Variable)] or
[Subwoofer].
24
GB
Subwoofer: To enable, set [Headphone/
Audio Out] to [Subwoofer].
Subwoofer Level
Adjust subwoofer volume level.
Phase
Select the phase polarity.
Subwoofer Sync
Adjusts the time lag of Subwoofer
sound.
Digital Audio Out: Sets the audio signal
that is output by connecting using
digital audio output (optical) cable or
HDMI cable.
Auto 1
Output compressed audio without
change.
Auto 2
Output only compressed audio for
multichannel content without change.
PCM
Always output in PCM.
TV Position: Improves the speaker
settings when set as [Table-Top Stand]
or [Wall Mount] according to your TV's
position.
HDMI signal format:
Standard
Standard HDMI format for normal use.
Enhanced
Set only for devices supporting High-
Quality HDMI formats such as 4K 60p
4:2:0 10bit, 4:4:4, 4:2:2.
Be sure to use a Premium High Grade
HDMI Cable that supports speed of 18
Gbps bearing the HDMI logo.
(Refer to the specification of the cable).
Note
• HDMI IN 2 and IN 3 only.
• Change to [Standard] if the picture and
sound do not output correctly in [Enhanced].
BRAVIA Sync Settings
Allows the TV to communicate with
equipment that is compatible with the
BRAVIA Sync Control function, and
connected to the HDMI port of the TV. Note
that communication settings must also be
made on the connected equipment.
Advertisement
Chapters
Table of Contents
