Stand Installation - LG 47LD950 Owner's Manual

PREPARATION

STAND INSTALLATION

■ Image shown may differ from your TV
When assembling the desk type stand, check whether the
bolt is fully tightened. (If not tightened fully, the product
can tilt forward after the product installation.) If you tight-
en the bolt with excessive force, the bolt can deviate from
abrasion of the tightening part of the bolt.
1
Carefully place the TV screen side down on a cushioned
surface to protect the screen from damage.
2
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in the
3
back of the TV.
A-4
BACK COVER FOR WIRE
ARRANGEMENT
■ Image shown may differ from your TV.
1
Connect the cables as necessary.
To connect additional equipment,
see the External Equipment
Setup section.
2
Open the Cable Management Clip as shown.
3
Fit the Cable Management Clip as shown.
!
NOTE
Do not use the Cable Management Clip to lift the
G G
TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
Cable Management Clip