Doctor Mode Table - Panasonic SA-VK880EE-K Service Manual

6.2.

Doctor Mode Table

Item
Mode Name
Doctor Mode To enter into Doctor Mode for checking
of variuos items and displaying
EEPROM and firmware version.
Note: The micro-processor version
as shown is an example. It will be
revise when there is an update.
FL Display sequence:
Display 1 2.
CR14D
To check the function operation of
Inspection
mechanism unit
Description
FL Display
(Display 1)
EEPROM Checksum
(if applicable)
1. The check Sum of EPPROM and firmware
version will be display.
* ROM correction.
* Firmware Version No:
checksum: (Condition 1):
Firmware
Version (DEC)
If there is no EEPROM Correction.
checksum: (Condition 2):
Firmware
Version (DEC)
If the EEPROM version matches, checksum
[YYYY] is displayed.
checksum: (Condition 3):
Firmware
Version (DEC)
If the version of the EEPROM does not
match or not working properly [NG] is
displayed
24
Key Operation
Front Key
In CD Mode:
1. Press [
-DEMO
on main unit follow by [4]
and [7] on remote control.
To exist, press [ok] button on
Opecon
remote control or press
Version
[ /I, POWER] button on main
unit or remote control.
No Correction
Point Data
Checksum
value (HEX)
applicable
when the
EEPROM IC
is installed
Firmware
different from
set
In Doctor mode:
1. Press [ DISC] button
on remote control.
To exist, press any key
] button