Timer Recording - LG RH2T5-WL Owner's Manual

Timer Recording

This recorder can be programmed to record up to 16
programs within a period of 1 month. For unattended
recording, the timer needs to know the channels to be
recorded, the starting and ending time.
Note:
If you use a completely blank disc for timer recording,
you must format the disc before starting timer
recording. (Refer to "Disc Format" on page 24.)
1. Press HOME and select [TV] option.
2. Press v / V to select [Timer Record] option then
press ENTER.
The [Timer Record List] menu will appear.
3. Use v / V to select [New] then press ENTER.
The [Timer Record] menu will appear.
[Media] Choose a media to record (HDD or
DVD).
[PR(CH)] Choose a memorized program
number, or one of the external inputs from
which to record.
(You cannot select DV input and radio channel.)
[Date] Choose a date up to 1 month in advance.
[Start Time] Set the start time.
[End Time] Set the end time.
[Repeat] Choose a desired repeat (Once,
Daily (Monday - Friday), or Weekly).
4. Enter the necessary information for your timer
recording(s).
b / B (left/right) – move the cursor left/right
v / V (up/down) – change the setting at the
current cursor position
Press RETURN (O) to exit the [Timer Record]
menu.
5. Set a recording mode as necessary by pressing
REC repeatedly. (XP, SP, LP, EP or MLP)
6. Press ENTER after filling in all the program
information. The program will be memorized by the
recorder.
To check the programming, the [Timer Record List]
menu will appear.
Check field's "Rec. OK" on the Timer Record List
indicates that the timer recording is programmed
correctly.
7. Press RETURN (O) to exit the Timer Record List.
8. Make sure that you press POWER to switch your
unit to Standby.
44
Notes:
The timer indicator lights in the display window
when the recorder is in standby with the timer
active. (Nothing is displayed while the [Power Save
Mode] is ON.)
For TV recording with bilingual, set audio channel
from the [TV Rec Audio] in sub-menu of the Setup
menu (see page 23).
You can stop a timer recording in progress.
Press STOP and the confirm message will appear.
Press ENTER to stop the recording or
press RETURN (O) to continue the recording.
If you set a timer recording to record to DVD but
there isn't a recordable DVD loaded at the time of
the recording, the Recovery Recording feature will
automatically record the program to the HDD for
you.
MPEG4 recording is not available with Timer
recording. (available only in MPEG2 recording
format)