Maintenance - Porter-Cable PCC792 Instruction Manual

TO INSTALL HANG HOOK
WARNING:
removed and the trigger lock-off engaged whenever
any adjustments are made or when tool is not in use.
1. Remove battery pack from tool, and engage
trigger lock-off.
2. With a screwdriver remove screw from hang hook
cavity on the base of the tool (16).
3. Place the front lip of the hang hook (11) into
the cavity on the base of the tool (16) as shown in
Figure I.
4. Secure the hang hook (11) with the supplied
screw (17) and firmly tighten with a screwdriver as
shown in Figure J.
5. Replace battery pack.

MAINTENANCE

WARNING:
unit off, engage trigger lock-off and remove battery
before installing and removing accessories, before adjusting or when making repairs. An
accidental start-up can cause injury.
ACTION: Clean magazine, pusher, and contact trip mechanism.
WHY: Permits smooth operation of magazine, reduces wear, and prevents jams.
Clean tool with a clean, damp cloth. Do not oil or lubricate this tool. The
HOW:
use of oils, lubricants or solvents is not recommended as
they tend to attract debris.
CLEANING
WARNING:
a week. To minimize the risk of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this.
WARNING:
metallic parts of the tool. These chemicals may weaken the plastic materials used in
these parts. Use a cloth dampened only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool into a liquid.
LUBRICATION
WARNING:
solvents inside the tool. This can seriously affect the life and performance of the tool.
PORTER-CABLE tools are properly lubricated at the factory and are ready for use.
However, it is recommended that, once a year, you take or send the tool to a certified
PORTER-CABLE service center for a thorough cleaning and inspection.
ACCESSORIES
WARNING:
have not been tested with this product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only PORTER-CABLE recommended
accessories should be used with this product.
A complete line of accessories is available from your PORTER-CABLE Factory Service
Center or a PORTER-CABLE Authorized Warranty Service Center. Please visit our
Web Site www.portercable.com for a catalog or for the name of your nearest supplier.
The battery should always be
To reduce the risk of injury, turn
Daily Maintenance Chart
Blow dirt and dust out of all air vents with clean, dry air at least once
Never use solvents or other harsh chemicals for cleaning the non-
NEVER spray or in any other way apply lubricants or cleaning
Since accessories, other than those offered by PORTER-CABLE,
I
J
14
16
17