Table of Contents
Advertisement
Transportation, e.g. if moving house
Preparatory work
Installing transportation protection devices
²
60
Turn off the tap.
1.
Release the water pressure in the supply hose.
2.
Maintenance – Filter in the water inlet hose ~ Page 38
Drain any residual detergent solution.
3.
Maintenance – Drain pump blocked ~ Page 36
Isolate the washing machine from the power supply.
4.
Remove the hoses.
5.
Remove covers and keep in a safe place.
1.
If required, use a screwdriver.
Insert all 4 sleeves.
2.
Clamp mains cable on the holders. Insert and tighten the
bolts.
Before switching on the
– Remove the transportation protection devices! ~ Page 50
– To prevent unused detergent from flowing into the outlet
during the next wash: Pour 1 litre of water into dispenser II
and start the Drain programme.
appliance:
Advertisement
Table of Contents
