Listening To The Memorised Station - Sharp CD-BK2700V Operation Manual

Listening to the Memorised Station

" Memorising a station
You can store 40 AM and FM stations in memory and recall them at the push of a but-
ton. (Preset tuning)
1
Perform the steps 1 - 3 in "Listening to the Radio" on page 32.
2
Press the MEMORY/SET button to enter the preset tuning saving
mode.
3
Within 30 seconds, press the
button to select the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY/SET button to store that
station in memory.
If the "MEMORY" and preset number indicators go out before the station is
memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
When a new station is stored in memory, the station previously memorised will
be erased.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
E-33 ENGLISH
PRESET or PRESET
Listening to the Radio (See page 32.)
" To recall a memorised station
Press the PRESET or PRESET
0.5 seconds to select the desired station.
Preset channel
This can be operated by pressing the PRESET (
control.
" To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1
Press the PRESET or
than 0.5 seconds.
! The preset number will flash and the programmed stations will be tuned in se-
quentially, for 5 seconds each.
! This can be operated by pressing the PRESET (
control.
2
Press the PRESET or PRESET
the desired station is located.
" To erase entire preset memory
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Whilst pressing down the TUNER (BAND) button and the X-BASS/DEMO button,
press the ON/STAND-BY button until "TUNER CL" appears.
01/4/24 CD-BK260V(X)E4.fm
button for less than
Frequency and frequency band
or ) button on the remote
PRESET button for more
or ) button on the remote
button again when