Replacing The Aquaclean Filter - Philips Saeco INCANTO HD8913 User Manual

80%
NEW?
0 / 8
ON
OFF
0 / 8
AQUA CLEAN
FILTER
1 / 8

Replacing the AquaClean filter

AQUA CLEAN
FILTER
1 / 8
0%
AQUA CLEAN
FILTER
NEW?
2 Press the MENU button, select MENU and press the OK button to
confirm. Scroll to AQUACLEAN FILTER. Press the OK button to confirm.
-
The display shows the number of AquaClean filters that have been
installed previously from 0 to 8 filters.
3 Select ON on the display, press the OK button to confirm.
4 The display automatically updates the number of filters used.
-
Then the 'machine ready' screen appears with the AquaClean 100%
icon to indicate that the filter has been installed.
5 Dispense 2 cups of hot water (0.5 l) to complete the activation. Discard
this water.
Note: Replace the AquaClean filter as soon as the capacity has dropped to
0% and the filter icon flashes quickly. Replace the AquaClean filter at least
every 3 months, even if the machine has has not yet indicated that
replacement is required.
Tip: We advise you to buy a new filter when the capacity has dropped to
10% and the filter icon starts flashing slowly. This ensures that you can
replace the filter when the capacity has dropped to 0%.
1 Take out the AquaClean filter and replace it by a new AquaClean filter
(also see the separate quick start guide).
2 Press the MENU button, scroll to AQUACLEAN FILTER and press the OK
button to confirm.
-
The display asks if you want to activate a new filter.
3 Press the OK button to confirm.
English
9