Important Safety Information - Danby DAC060BBCWDB Owner's Use And Care Manual

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS
FOR YOUR SAFETY: Read these instructions carefully before operating the unit.
ELECTRICAL SPECIFICATIONS
1. All wiring must comply with local and national electrical codes and must be installed by a qualifi ed electrician. If you
have any questions regarding the following instructions, contact a qualifi ed electrician.
2. Check available power supply and resolve any wiring problems BEFORE installing and operating this unit.
3. This 115V air conditioner uses between 4.5 and 5.9 nameplate amps and may be used in any properly wired, general
purpose household receptacle. See Table 1 for the specifi cations for the individual branch circuit.
4. For your safety and protection, this unit is grounded through the powercord plug when plugged into a matching wall
outlet. If you are not sure whether your wall outlet is properly grounded, please consult a qualifi ed electrician.
5. The wall outlet must match the 3-prong plug on the service cord supplied with the unit. DO NOT use plug adapters.
See Table 2 for receptacle and fuse information.
6. The rating plate on the unit contains electrical and other technical data. The rating plate is located on the right side of
the unit, above the powercord.
DAC060BBCWDB
Suggested Individual Branch Circuit
Nameplate Amps
4.5
AWG- American Wire Gauge
*Based on copper wire at 60°C temperature rating
Receptacle and Fuse Types
Rated Volts
Amps
Wall Outlet
Fuse Size
Time Delay Fuse
(or Circuit Breaker)
TABLE 1
*AWG Wire Size
18
TABLE 2
Plug Type
Suggested Individual Branch Circuit
Nameplate Amps
AWG- American Wire Gauge
*Based on copper wire at 60°C temperature rating
125 Rated Volts
15 Amps
Wall Outlet
15 Fuse Size
Time Delay Fuse
(or Circuit Breaker)
2
TABLE 1
DAC080BBCWDB
*AWG Wire Size
5.9
TABLE 2
Receptacle and Fuse Types
16
125
15
15
Plug Type