4 Use your TV
Switching on your TV and putting it in
Standby mode
50ME313V / 46ME313V
* Key on Rear
To Turn the TV On from Standby or Off to Standby
•
Press
(3 raised dots on the Rear panel) or Front panel or the
Remote control.
Note
• Energy consumption contributes to air and water pollution. When the AC power cord
is plugged in, your TV consumes energy. Your TV has very low standby power
consumption.
Adjusting volume
50ME313V / 46ME313V
* Keys on Rear
50" - 39"
To decrease or increase volume
•
Press VOL ◄ / ► (1 raised dot on the Rear panel) or Front panel
or press VOL + / − on the Remote control.
VOL ◄ : Volume Down
VOL ► : Volume Up
To mute or unmute sound
•
Press
on the remote control to mute the sound.
•
Press
again or VOL + / − to recover the original sound.
39ME313V / 39ME413V / 32ME303V /
32ME403V / 29ME403V / 24ME403V
39ME313V / 39ME413V / 32ME303V /
32ME403V / 29ME403V / 24ME403V
32" - 24"
Switching channels
50ME313V / 46ME313V
* Keys on Rear
50" - 39"
To select Channels by using CH ▼/▲ or CH + / −
•
Press CH ▼ (Down) / ▲ (Up - 1 raised dot on the Rear panel) or
Front panel or press CH + / − on the Remote control.
To select Channels by using the NUMBER buttons
Digital TV operation
•
For Digital channels, press a number followed by a dot "•" and the
corresponding sub channel number.
–
When selecting Digital channel 11.1
Be sure to press • before entering the subchannel number.
Analog/Cable TV operation
–
When selecting cable or Analog channel 11
Press PREV.CH to return to the previously viewed channel.
Note
• To select the non-memorized channels, use the NUMBER buttons.
• No Signal will appear on the TV screen after the subchannel broadcast is over.
• Audio only program message will appear on the TV screen, when you receive only
sound signal.
* On the 46" & 50" TV's All CONTROL Keys are located on the Rear
(lower right) side of the unit as viewed from the Front.
39ME313V / 39ME413V / 32ME303V /
32ME403V / 29ME403V / 24ME403V
32" - 24"
17
English