System Requirements - Fantom Drives GF1000T Quick Start Installation Manual

Fantom drives gf1000t: quick start

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

Q: Is the Drive compatible with Windows NT 4.0?

A: No.

Q: I do not see my Drive listed in the My Computer window,

but it does appear in the Device Manager list.

A: Right-click on My Computer. Select Manage in the pop-up

menu. In the Computer Management window, select Storage,

then select Disk Management. In the Disk Management window,

you should see a list of available storage devices. Look for the

Disk that has a capacity closest to your Fantom Drives External

Hard Drive. Right-click on the right-hand box; in the pop-up menu

select Delete Partition. Once you do this, it will say "Online" &

"Unallocated". Right-click on the

Partition in the pop-up menu. When the Partition Wizard

appears, select Primary Partition and click on Next. You will see

a default value for the Drive; click Next. You will then see a drive

letter (you can change this drive letter if you wish); click Next. You

will then be asked to format the Drive.

Q: After I connected the Drive to my PC, I got the following

alert message: HI-SPEED USB Device Plugged into non-HI-

SPEED USB Hub." What does this mean?

A: Windows 2000 and XP users will get this alert message if you

plugged the Drive into a USB port that only supports USB 1.1.

This is fine, except your Drive will operate USB 1.1 speeds.

If an issue cannot resolved by using our FAQ, please contact

Technical Support via the Fantom Drives support site at

http://www.FantomDrives.com/help

box and select Create New