Error Mode - LG F1069FD2 Owner's Manual

ERROR MODE

Meaning of Error Codes that LED displays during occurrence of problem.
Problem
• Water supply is not adequate in area.
• Water supply taps are not completely open.
• Water inlet hose is bent.
• The filter of the inlet hose clogged.
• Drain hose is bent
or clogged.
• The drain filter is clogged.
• Load is too small.
• Load is out of balance.
• The appliance has an imbalance detection and
correction system. If individual heavy articles
are loaded (bath mat, bath robe, etc.) and the
imbalance is too great, after several attempts to
restart the spin cycle the machine will stop and
the error code will be displayed.
• Is the door opened or not completely closed?
• The water overfills due to a faulty water valve.
• The water level sensor malfunction.
• Overload in motor.
• Thermister is opened or shorted.
• Disconnection of card reader wire.
• Too much detergent is used.
Possible Cause Solution
Check another tap in the house.
Fully open tap.
Straighten hose.
Check the filter of the inlet hose.
Clean and straighten the drain hose.
Clean the drain filter.
Add 1 or 2 similar items to help
balance the load.
Rearrange load to allow proper spinning.
Close the door completely.
✽ If it will not open, call for service.
Close the water tap.
Unplug the power plug.
Call for service.
Restart the cycle after 30 minutes.
If is not released, call for service.
Thermistor should be replaced.
Check the card reader wire.
This is not an error.
Please wait until removed
65
ERROR MODE