Table of Contents
Advertisement
[BD-Live Security]
You can restrict internet access for BD-Live bonus
contents which are available to certain Blu-ray discs.
[On] - Internet access is prohibited for all BD-
Live contents.
[Off]- Internet access is permitted for all BD-
Live contents.
[Network]
Set up a connection to internet to download
updated software and access BD-Live bonus
contents. It guides you through a step-by-step
network installation procedure.
Note
[Software Download]
the playability of this product.
[USB] - Download software from the USB
device which is connected to this product.
[Network] - Download software from
network.
Note
[Clear Memory]
Note
When you clear the local storage, previous download of
BD-Live bonus contents is no longer available.
If the internal memory of this product is not enough
to download BD-Live bonus contents for a BD disc,
reformat the local storage to clear all the contents.
Note
You can use a USB device as an external storage to store
connected USB device.
[DivX® VOD Code]
20
EN
Tip
Use this product's DivX registration code when you rent
or purchase video from www.divx.com/vod. The DivX
device to which it is registered.
[Version Info.]
Display the software version and the MAC address
of this product.
Tip
This information is needed for you to check if a latest
software version is available at the Philips website so that
you can download and install on this product.
[Restore Default Settings]
Reset all the settings of this product to the factory
settings, except for [Parental Control] setting.
7 Additional Information
Update software
For software updates to enchance performance,
check the current software version of this product to
Philips website.
1
Press
.
2
Select [Settings], then press OK.
3
Select [Advanced Setup] > [Version Info.],
then press OK.
Update software via network
1
2
In the Home menu, select [Settings] >
[Advanced Setup] > [Software Download] >
[Network].
»
You are prompted to start upgrading
processs if upgrade media is detected.
3
Follow the instructions on the TV screen to
»
Once software update is complete, this
product automatically turns off to standby.
4
Disconnect the power cord for a few seconds
and connect again to turn on this product.
Advertisement
Table of Contents
