Table of Contents
Advertisement
•
The following formats are not supported:
•
Files like *.VMA, *.AAC, *.DLF, *.M3U
•
*.PLS, *.WAV
•
Discs recorded in Joliet format
•
MP3 Pro and MP3 with ID3 tag
USB playability information
Compatible USB devices:
•
USB Á ash memory (USB 2.0 or USB1.1)
•
USB Á ash players (USB 2.0 or USB1.1)
•
memory cards (requires an additional card
reader to work with this apparatus)
Supported formats:
•
USB or memory À le format FAT12, FAT16,
FAT32 (sector size: 512 bytes)
•
MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
•
WMA v9 or earlier
•
Directory nesting up to a maximum of 8 levels
•
Number of albums/ folders: maximum 99
•
Number of tracks/titles: maximum 999
•
ID3 tag v2.0 or later
•
File name in Unicode UTF8 (maximum length:
128 bytes)
Unsupported formats:
•
Empty albums: An empty album is an album
that does not contain MP3/WMA À les.
•
Unsupported À le formats are skipped. For
example, Word documents (.doc) or MP3 À les
with extension .dlf are ignored and not played.
•
AAC, WAV, PCM audio À les
•
DRM protected WMA À les (.wav, .m4a, .m4p,
.mp4, .aac)
•
WMA À les in Lossless format
10 Troubleshooting
Caution
•
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the
system yourself.
If you encounter problems when using this apparatus,
check the following points before requesting service.
If the problem remains unsolved, go to the <brand>
web site (www.<brand>.com/support). When you
contact <brand>, ensure that your apparatus is
nearby and the model number and serial number are
available.
No power
•
Ensure that the AC cord of the apparatus is
connected properly.
•
Ensure that there is power at the AC outlet.
•
As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control is
operated.
No disc detected
•
Insert a disc.
•
Check if the disc is inserted upside down.
•
Wait until the moisture condensation at the
lens has cleared.
•
Replace or clean the disc.
•
Use a À nalized CD or correct format disc.
No picture
•
Check the video connection.
•
Turn on the TV to the correct Video-In
channel.
•
Progressive scan is activated but the TV does
not support progressive scan.
Black and white or distorted picture
•
The disc does not match the TV color system
standard (PAL/NTSC).
•
Sometimes a slight picture distortion may
appear. This is not a malfunction.
•
Clean the disc.
•
A distorted picture may appear during
progressive scan setup.
The aspect ratio of the TV screen cannot be
changed even though you have set the TV display
format.
•
The aspect ratio is À xed on the loaded DVD
disc.
EN
19
Advertisement
Table of Contents
