Table of Contents
Advertisement
Plug & Play
¦
Hotel Plug & Play automatically performs Hotel mode selection, country setup, clock setup and picture mode setup.
‒ Hotel Plug & Play is available only one time when power is first turned on.
‒ This is available after first setting up the TV and transferring Clone TV data to a USB drive.
‒ To use next TV, you only need to exit Hotel Plug & Play, connect the USB, then Clone the USB to TV.
‒ Depending on model and region, some menus may not exist.
Self Diagnosis for TV
Self Diagnosis for HTV
SW Update
Sound Bar Out
OFF
Contact Samsung
Standby LED
ON
TV Reset
Region Settings
Change the region settings if you are located in North America, Latin
America, or Europe. Your TV might not function if the region settings are not
correctly configured. When the region settings are changed, your TV will
automatically restart to apply them.
ED_AFR
ED_MYAN
ED_MAL
ED_UAE
ED_M_ASIA2
Welcome to Samsung TV!
Select your language to start the on screen setup.
Bienvenue!
Use the Up and Down buttons to change the
Welcome!
Bienvenido!
TV installation Type
Select your TV installation type.
Basic TV Setup
Start basic setup to use your TV.
Cloning Mode
Factory Menu
If you select
Cloning Mode
If you select
Factory Menu
If you select Factory Reset, the TV resets all values to their
factory defaults and then displays the Hospital Plug & Play
menu. Go to the first Hotel Plug & Play screen below.
Next
If you change the country
of the Current Location.
Next
Previous
language.
Next
Country
Picture Mode
Copy the system settings from the
USB or server to the TV.
End setup and go to Factory Menu
directly.
The TV is automatically
turned off and on.
2
3
Terr./Cable Signal Detected
Select each item and choose the correct setting. Then select Next to search for channels.
Select the connected aerial that you want to use to get channels
Aerial
Terrestrial
Channel Type
Digital & Analogue
Next
1
2
3
Configure your TV
Set the basic options to use your TV.
Others
Select the picture mode that best suits your
Standard
viewing environment.
Press
POWER
button to exit.
Next
Previous
Next
Previous
Clock Settings
Set the correct time by applying daylight saving time (if
required) and setting your local time zone.
Clock Mode
Date
Time
Time Zone
GMT
Hotel Option Menu
2
Next
3
Scan Channels
Scanning for channels...
Digital
- TV
- Radio
- Data/Other
Analogue
Stop
Next
3
2
Auto
Current Time
--:-- --
--/--/----
--:-- --
Eastern
0
Setup Complete!
Your TV is now ready to use.
Done
appears.
35
English
Advertisement
Table of Contents
